RTL8211FD(I) |
您所在的位置:网站首页 › rtl8211f pdf › RTL8211FD(I) |
General Description The Realtek RTL8211FD-CG/RTL8211FDI-CG is a highly integrated Ethernet transceiver that is compatible with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. It provides all the necessary physical layer functions to transmit and receive Ethernet packets over CAT.5 UTP cable. The RTL8211FDI-CG is manufactured to industrial grade standards. The RTL8211FD(I)-CG uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented in the RTL8211FD(I)-CG to provide robust transmission and reception capabilities at 10Mbps, 100Mbps, or 1000Mbps. Data transfer between MAC and PHY is via the Reduced Gigabit Media Independent Interface (RGMII) for 1000Base-T, 10Base-T, and 100Base-TX. The RTL8211FD(I)-CG supports various RGMII signaling voltages, including 3.3, 2.5, 1.8, and 1.5V. The RTL8211FD(I)-CG incorporates a linear Low-Dropout Regulator (LDO) that features high power supply ripple rejection and low output noise. The built-in LDO means a power inductor is not required for the RTL8211FD(I)-CG; only an output capacitor is required between the 1.0V output and the analog ground for phase compensation, which saves cost and PCB real estate. Features 1000Base-T IEEE 802.3ab compatible 100Base-TX IEEE 802.3u compatible 10Base-T IEEE 802.3 compatible Supports RGMII Supports IEEE 802.3az-2010 (Energy Efficient Ethernet) Built-in Wake-on-LAN (WOL) Supports Interrupt function Supports Parallel Detection Crossover Detection & Auto-Correction Automatic polarity correction Supports PHYRSTB core power Turn-Off Baseline Wander Correction Supports 120m for CAT.5 cable in 1000Base-T Selectable 3.3/2.5/1.8/1.5V signaling for RGMII Supports 25MHz external crystal or OSC Provides 125MHz clock source for MAC Provides 3 network status LEDs Supports Link Down power saving Green Ethernet (1000/100Mbps mode only) Built-in Switching LDO 40-pin QFN Green package 55 nm process with ultra-low power consumption Industrial grade manufacturing process (RTL8211FDI-CG) Applications DTV (Digital TV) MAU (Media Access Unit) CNR (Communication and Network Riser) Game Console Printer and Office Machine DVD Player and Recorder Ethernet Hub Ethernet SwitchIn addition, the RTL8211FD(I)-CG can be used in any embedded system with an Ethernet MAC that needs a UTP physical connection. |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |